Posts
- UNIT SIG report – October 2018 to September 2019
- Business Requirements of Certification
- Using COSMOtherm predictions in process simulations
- Thermo SIG report – October 2018 to September 2019
- UMR-PRU thermodynamic model: application to natural gas processing
- Y19-34 – Chemical reactions
- Development of the Multiflash CAPE-OPEN Interface
- Evonik’s vision of process simulation in the near future: How could CAPE-OPEN come into play?
- CAPE-OPEN Unit Operation for OGT Simulation Software
- Y19-33 – Chemical reactions
- Y19-26 – Activity report
- Y19-25 – Activity report
- Raising the working levels of the chemical engineering community through process simulation
- Ontology development for virtual marketplaces in materials modelling
- Y19-30 – Chemical reactions
- CAPE-OPEN interface boosts your engineering workflow
- Software Services – Request for Bids
- Y19-07 – Monthly review of actions
- Y19-29 – Chemical reactions
- Y19-21 – Threading model
- Mixed-Integer Optimization in GAMS using CAPE-OPEN Thermodynamics via MOSAICmodeling and COBIA for Conceptual Design
- Contract signed for consultancy services to OGT
- Y19-20 – Flowsheet Monitoring
- Y19-27 – Chemical reactions
- Y19-28 – Chemical reactions
- Consultancy services in place
- New BASF representative in CO-LaN
- Deprecation of Thermo version 1.0
- Y19-06 – Monthly review of actions
- Flowsheet Monitoring specification released
- Flowsheet Monitoring
- 173 – Monthly conference call
- Consultancy services awarded to OGT
- Michael Halloran as consultant for 2019-2020
- Y19-21 – Chemical reactions
- Y19-20 – Chemical reactions
- A demonstration to re-use a MATLAB® unit model in different process simulators
- CAPE-OPEN Awareness lecture
- CAPE-OPEN 2019 Annual Meeting
- Y19-05 – Monthly review of actions
- Data Exchange for the Process Industries
- New release of ProSim software
- Y19-03 – Monthly review of actions
- Y19-04 – Monthly review of actions
- Y19-08 – COBIA
- April 2019 issue
- Y19-05 – Petroleum Fractions
- 167 – Monthly conference call
- Release of aspenONE® V11
- OPTIMIZE 2019
- Rate-based parallel column model for DWC
- Support to COBIA-based developments
- 170 – Face to face meeting
- A rate-based equation-oriented parallel column model: Application to dividing wall columns
- Y19-03 Joint meeting M&T/Interop SIGs
- New BP representative in CO-LaN
- New DOW representative in CO-LaN
- Data Exchange for Process Engineering – Challenges and Opportunities
- Capital Gain Consultants as new Associate Member
- Y19-02 Joint meeting M&T/Interop SIGs
- Call for Consultancy Service Requests
- Y19-01 Joint meeting M&T/Interop SIGs
- The Chemical Engineer features CAPE-OPEN
- Process optimization using CAPE-OPEN Unit Operation
- Subsea natural gas dehydration with membrane processes: Simulation and process optimization
- Thermodynamic Modeling of Natural Gas and Gas Condensate Mixtures
- Fischer-Tropsch reactor model in CAPE-OPEN Unit Operation
- Improving carbon efficiency and profitability of the biomass to liquid process with hydrogen from renewable power
- CAPE-OPEN in a review on natural gas processing
- Y18-32 – COBIA
- November 2018 issue
- Y18-07 Joint meeting M&T/Interop SIGs
- Y18-06 – Petroleum Fractions
- Y18-12 – Monthly review of actions
- CAPE-OPEN in ProSim News November issue
- Y18-37 – Chemical reactions
- Developing Software Tools Facilitating Interdisciplinary Modelling
- Process economics with a MATLAB Unit Operation in Aspen Plus
- Techno-economic evaluation of a process for direct conversion of methane to aromatics
- Y18-36 – Chemical reactions
- 166 – Monthly conference call
- COCO 3.3 released
- CAPE-OPEN
- Survey
- 165 – Monthly conference call
- Review requested on Flowsheet Monitoring
- Y18-29 – COBIA
- AIChE 2018 Annual Meeting
- October 2018 issue
- Review requested on Errata for Thermodynamic interface specification
- HTRI XChanger Suite in ProSimPlus
- MATLAB® Unit Operation
- On-demand training on CAPE-OPEN FORTRAN Unit Operation Wizard
- Y18-11 – Monthly review of actions
- Y18-32 – Chemical reactions
- Y18-05 – Petroleum Fractions
- Y18-28 – COBIA
- New version of MATLAB CAPE-OPEN Unit Operation
- Y18-06 Joint meeting M&T/Interop SIGs
- COBIA licensing
- COBIA Phase III: marshaling
- My experiences with COBIA Class Wizard
- Methods & Tools SIG: October 2017 till September 2018
- The use of CAPE-OPEN tools, COCO, Chemsep, in the teaching of undergraduate students at universities in southern Africa
- Annual General Meeting 2018
- October 10, 2018 election
- CAPE-OPEN 2017 Award
- Discussion on diffusion coefficients
- Enabling process simulation of reactive electrolyte mixtures using CAPE-OPEN
- Introduction to Lonza AG with respect to CAPE-OPEN
- Thermo SIG: October 2017 till September 2018
- Simulation of New Gas Processing Concepts
- CO-LaN Certification project report 2018
- Interoperability SIG progress report 2018
- MATLAB® Unit Operation potential improvements for academic use
- Example code of CAPE-OPEN Unit Operation socket
- A Rate-Based Equation-Oriented Parallel Column Model: Application to Dividing Wall Columns
- CAPE-OPEN Survey
- BASF at a glance
- CAPE-OPEN 2018 Annual Meeting
- Y18-27 – Activity report
- Y18-26 – Activity report
- New representative for AVEVA
- Y18-31 – Chemical reactions
- Y18-30 – Chemical reactions
- September 2018 issue
- Y18-29 – Chemical reactions
- COBIA training course at BASF
- Y18-25 – COBIA and activity report
- SIMS 59
- New representative appointed for ANSYS
- Joint academic/industrial research work using CAPE-OPEN link
- Model of an industrial multitubular reactor for methanol to formaldehyde oxidation in the presence of catalyst deactivation
- Y18-24 – COBIA
- Y18-04 – Petroleum Fractions
- Y18-23 – COBIA
- Y18-03 – Petroleum Fractions
- Y18-22 – COBIA
- Review requested for Custom Data interface specification
- MEMSIC for optimization of multistage membrane gas separation processes
- Optimization of multistage membrane gas separation processes. Example of application to CO2 capture from blast furnace gas
- Y18-10 – Monthly review of actions
- Y18-09 – Monthly review of actions
- Y18-27 – Chemical reactions
- New representative for BelSim Engineering SA
- Y18-21 – COBIA
- Y18-26 – Chemical reactions
- Y18-25 – Chemical reactions
- Y18-24 – Chemical reactions
- 162 – Monthly conference call
- Y18-23 – Chemical reactions
- Y18-19 – COBIA
- Y18-22 – Chemical reactions
- Y18-05 Joint meeting M&T/Interop SIGs
- Y18-08 – Monthly review of actions
- Y18-21 – Chemical reactions
- Y18-04 Joint meeting M&T/Interop SIGs
- Y18-07 – Monthly review of actions
- 161 – Monthly conference call
- Y18-20 – Chemical reactions
- CAPE-OPEN forum unreachable
- Y18-18 – Common interfaces
- July 2018 issue
- Ontology engineering approach to support process of model integration
- Y18-19 – Chemical reactions
- MR Woodman Consulting Ltd
- New representative for Honeywell Process Solutions
- Call for papers at ICheaP-14
- Y18-17 – COBIA
- Dynamic Co-Simulation of Internet-of-Things-Components using a Multi-Agent-System
- Y18-18 – Chemical reactions
- Certification SIG
- Preliminary steps towards a Certification SIG
- Y18-16 – COBIA
- June 2018 issue
- Y18-06 – Monthly review of actions
- 160 – Monthly conference call
- Y18-17 – Chemical reactions
- ESCAPE 28
- CAPE-OPEN survey
- Y18-15 – Common interfaces
- Y18-14 – Common interfaces
- REFPROP CAPE-OPEN
- Y18-16 – Chemical reactions
- Request for comments on new economic dimension
- Y18-14 – Chemical reactions
- Y18-15 – Chemical reactions
- Reactive distillation modelled through gPROMS linked to Aspen Properties
- Analysis of direct synthesis of dimethyl carbonate from methanol and CO2 intensified by in-situ hydration-assisted reactive distillation with side reactor
- 51st CIRP Conference on Manufacturing Systems
- Y18-05 – Monthly review of actions
- Y18-12 – Chemical reactions
- 159 – Monthly conference call
- Y18-11 – Chemical reactions
- Simulation of Rotating Packed Bed using CAPE-OPEN
- Study of intercooling for rotating packed bed absorbers in intensified solvent-based CO2 capture process
- New representative for Technische Universität Berlin
- Semantically-enabled repositories in multi-disciplinary domains: The case of biorefineries
- Y18-04 – Monthly review of actions
- Assessment of a membrane contactor process for pre-combustion CO2 capture by modelling and integrated process simulation
- Membrane contactor for subsea natural gas dehydration: Model development and sensitivity study
- Contract renewed in 2018 with Stenhouse Simulations Ltd
- NTNU uses MATLAB Unit Operation in Aspen HYSYS
- Y18-08 – Chemical reactions
- Y18-05 – Common interfaces
- Y18-03 – Versioning proposal
- Y18-07 – Chemical reactions
- Y18-06 – Chemical reactions
- Y18-05 – Chemical reactions
- Introduction to CAPE-OPEN in undergraduate course
- Programming skills in the industry 4.0: are chemical engineering students able to face new problems?
- Y18-04 – Chemical reactions
- Y18-03 – Threading model
- Y18-04 – COBIA
- Y18-03 – Chemical reactions
- Y18-01 – Monthly review of actions
- Y18-02 – Common interfaces
- Y18-02 – Chemical reactions
- Y18-01 – Chemical reactions
- New representative for Optimized Gas Treating
- Peter NELLEN
- Peter NELLEN as new Associate Member
- New version of ChemSep
- Y18-01 – Common interfaces
- Y17-13 – Common interfaces
- Y17-42 – Chemical reactions
- 154 – Monthly conference call
- Y17-12 – Common interfaces
- Y17-41 – Chemical reactions
- Proposal for Reporting interface in COBIA
- Y17-14 – CAPE-OPEN Object Model: COBIA
- Y17-40 – Chemical reactions
- Y17-39 – Chemical reactions
- Y17-10 – Petroleum Fractions
- Y17-13 – CAPE-OPEN Object Model: COBIA
- Y17-12 – CAPE-OPEN Object Model: COBIA
- Y17-38 – Chemical reactions
- Y17-13 – Monthly review of actions
- Population balance modelling of pulsed packed bed extraction columns using PPBLab software
- Automatic Generation of Simulation Code for Embedding Custom Unit Operations in CAPE Software
- Investigating practical aspects of the exergy based multi-objective optimization of chemical processes
- 153 – Monthly conference call
- Challenges and Potentials of Modelling Tools Total Site Integration and Utility System Optimisation
- A Semantic Repository for Model Integration in Biorefining
- Y17-11 – Common interfaces
- Y17-09 – Petroleum Fractions
- Y17-37 – Chemical reactions
- AIChE 2017 Annual Meeting
- Y17-08 – Petroleum Fractions
- Y17-36 – Chemical reactions
- Y17-12 – Monthly review of actions
- Fix to CAPE-OPEN Logging and Testing Tool v2.4
- Y17-11 – CAPE-OPEN Object Model: COBIA
- Y17-10 – CAPE-OPEN Object Model: COBIA
- Y17-35 – Chemical reactions
- MEMSIC
- CAPE-OPEN 2016 Award
- UNIT SIG report – October 2016 till September 2017
- Current status of ProSim software with regards CAPE-OPEN
- Process Optimization using CAPE-OPEN Tools
- Thermo SIG: October 2016 till September 2017
- October 13, 2017 election
- Annual General Meeting 2017
- COBIA Phase II
- Methods & Tools SIG report – October 2016 to September 2017
- CAPE-OPEN Easy Access for Students and Academics: Using MOSAIC for Automatized Implementation of Unit Operations
- CAPE-OPEN Certification: Improve Robustness and Interoperability of CAPE-OPEN implementations
- Update on CAPE-OPEN in KBC
- MEMSIC 2.0: Membrane Gas Separation Simulator
- Interoperability SIG report – October 2016 to September 2017
- Interoperability SIG report – October 2016 to September 2017
- CAPE-OPEN Update on PRO/II 10.1
- HTRI Implementation of CAPE-OPEN standards: Current and Planned
- UniSim Design Suite – Current CAPE-OPEN Capabilities
- Use of CAPE-OPEN at BP
- Introduction to OGT
- Y17-11 – Monthly review of actions
- Y17-34 – Chemical reactions
- Y17-33 – Chemical reactions
- The Development of Chemical Process Simulation Software According to CAPE-OPEN
- ESCAPE 27
- Y17-09 – CAPE-OPEN Object Model: COBIA
- Y17-32 – Chemical reactions
- Optimized Gas Treating, Inc.
- 152 – Face to face meeting
- Optimized Gas Treating, Inc. as new Associate Member
- Y17-31 – Chemical reaction specification
- Y17-30 – Chemical reaction specification
- Y17-10 – Flowsheet Monitoring
- CAPE-OPEN Unit Operation socket in SuperPro Designer®
- Intelligen, Inc. awarded Consultancy Services
- Y17-10 – Common interfaces
- Y17-10 – Monthly review of actions
- Y17-29 – Chemical reaction specification
- Y17-09 – Common interfaces
- Y17-28 – Chemical reaction specification
- Y17-27 – Chemical reaction specification
- 151 – Monthly conference call
- Y17-26 – Chemical reaction specification
- Design and Simulation of Rate-based CO2 Capture Processes Using Carbonic Anhydrase (CA) Applied to Biogas
- Y17-09 – Flowsheet Monitoring
- Y17-23 – Chemical reaction specification
- Y17-24 – Chemical reaction specification
- Y17-25 – Chemical reaction specification
- Y17-08 – Flowsheet Monitoring
- Y17-08 – Common interfaces
- Y17-09 – Monthly review of actions
- Y17-08 – CAPE-OPEN Object Model: COBIA
- SIMULTECH 2017
- 150 – Monthly conference call
- 149 – Monthly conference call
- CAPE-OPEN 2017 Annual Meeting
- List of Named Values
- Y17-08 – Monthly review of actions
- Y17-07 – CAPE-OPEN Object Model: COBIA
- Y17-07 – Common interfaces
- Y17-07 – Flowsheet Monitoring
- Y17-06 – Monthly review of actions
- A Semantic Web Engine for Biorefining Model Integration
- Y17-07 – Petroleum Fractions interface specification
- Y17-06 – Flowsheet Monitoring
- Thermodynamic analysis of recuperative gas turbines and aero engines
- Michael Halloran renewed as consultant for 2017-2018
- Y17-06 – Petroleum Fractions interface specification
- 147 – Face to face meeting
- Using 3rd party thermodynamic model and waste reduction algorithm
- A techno-economic comparison of subcritical water, supercritical CO2 and organic solvent extraction of bioactives from grape marc
- Y17-05 – Common interfaces
- Y17-05 – Petroleum Fractions interface specification
- Y17-12 – Chemical reaction specification
- CAPE-OPEN support among comparison criteria
- Prospects of using equilibrium-based column models in dynamic process simulation of post-combustion CO2 capture for coal-fired power plant
- Y17-10 – Chemical reactions
- Y17-04 – Petroleum Fractions interface specification
- Y17-03 – CAPE-OPEN Object Model: COBIA
- Y17-09 – Chemical reaction specification
- CAPCO2
- Y17-04 – Monthly review of actions
- Y17-02 – CAPE-OPEN Object Model: COBIA
- Y17-04 – Methods & Tools conference call
- Looking into ways to improve website
- Y17-08 – Chemical reaction specification
- 146 – Monthly conference call
- Y17-07 – Chemical reaction specification
- Y17-04 – Flowsheet Monitoring
- Y17-03 – Flowsheet Monitoring
- Y17-03 – Methods & Tools conference call
- Y17-02 – Methods & Tools conference call
- Y17-03 – Petroleum Fractions interface specification
- 145 – Monthly conference call
- 144 – Monthly conference call
- Y17-02 – Petroleum Fractions interface specification
- Y17-01 – Petroleum Fractions interface specification
- 143 – Monthly conference call
- Y17-06 – Chemical reaction specification
- Y17-05 – Chemical reaction specification
- Developer Guide for Type Libraries and PIA installers
- Y17-03 – Monthly review of actions
- Release of Developer Guide for Type Libraries and PIA installers
- New application of CAPE-OPEN in Diana
- Y17-02 – Chemical reaction specification
- Y17-03 – Chemical reaction specification
- Y17-04 – Chemical reaction specification
- Entire process model uses thermo through CAPE-OPEN
- Economic comparison of a reactive distillation-based process with the conventional process for the production of ethyl tert-butyl ether(ETBE)
- Y17-01 – CAPE-OPEN Object Model: COBIA
- Y17-02 – Monthly review of actions
- Re-evaluating the CPA EoS for improving critical points and derivative properties description
- Y17-01 – Methods & Tools conference call
- COLTT 2.4 released
- Y16-12 – CAPE-OPEN Object Model: COBIA
- Y17-01 – Chemical reaction specification
- Utilization of blast furnace flue gas: Opportunities and challenges for polymeric membrane gas separation processes
- TOTAL withdraws from CO-LaN
- Y16-37 – Chemical reaction specification
- Y17-01 – Monthly review of actions
- Y16-11 – Monthly review of actions
- Y16-10 – Monthly review of actions
- Economic impact evaluated through WAR in COFE
- A systematic approach to the optimal design of chemical plants with waste reduction and market uncertainty
- Y16-36 – Chemical reaction specification
- Y16-35 – Chemical reaction specification
- Y16-13 – Methods & Tools conference call
- 142 – Monthly conference call
- Y16-13 – Petroleum Fractions interface specification
- Y16-34 – Chemical reaction specification
- Automatic model reduction of differential algebraic systems by proper orthogonal decomposition
- Ramiz A. MOMIN
- COBIA Phase II launched
- Ramiz MOMIN’s application approved
- Y16-33 – Chemical reaction specification
- Y16-12 – Methods & Tools conference call
- 141 – Monthly conference call
- Y16-12 – Petroleum Fractions interface specification
- Y16-11 – CAPE-OPEN Object Model: COBIA
- Y16-10 – CAPE-OPEN Object Model: COBIA
- Annual General Meeting 2016
- Y16-11 – Petroleum Fractions interface specification
- Y16-32 – Chemical reaction specification
- UNIT SIG Report – October 2015 to September 2016
- October 6, 2016 election
- Interoperability SIG report – October 2015 to September 2016
- Thermo SIG report – October 2015 to September 2016
- COBIA – Phase I
- Methods & Tools SIG report – October 2015 to September 2016
- CAPE-OPEN: Update in PRO/II v10.0
- LINDE field report on CAPE-OPEN Thermo
- CAPE-OPEN 2015 Award
- Rigorous variable permeability modelling and process simulation for the design of polymeric membrane gas separation units: MEMSIC simulation tool
- Y16-10 – Petroleum Fractions interface specification
- Y16-31 – Chemical reaction specification
- Cryogenic pressure temperature swing adsorption process for natural gas upgrade
- COCO 3.2 released
- Y16-30 – Chemical reaction specification
- Y16-09 – Petroleum Fractions interface specification
- Y16-11 – Methods & Tools conference call
- Y16-09 – Monthly review of actions
- Y16-29 – Chemical reaction specification
- Hafnium Labs
- 140 – Face to face meeting
- Hafnium Labs as new Associate Member
- Y16-28 – Chemical reaction specification
- Assessment of thermodynamic models for the design, analysis and optimisation of gas liquefaction systems
- Y16-08 – Monthly review of actions
- Y16-08 – Petroleum Fractions interface specification
- New representative for SINTEF
- Y16-09 – CAPE-OPEN Object Model: COBIA
- Y16-27 – Chemical reaction specification
- 139 – Monthly conference call
- Y16-09 – Methods & Tools conference call
- Y16-26 – Chemical reaction specification
- Advanced Process Engineering Co-Simulator (APECS)
- Model-centric process engineering
- Binary software components
- Configuration files
- Single-compound equilibrium calculations
- Phase Equilibrium calculations
- Liquid phase properties
- Vapor phase properties
- Mixture properties
- Y16-08 – CAPE-OPEN Object Model: COBIA
- Y16-25 – Chemical reaction specification
- Y16-09 – Flowsheet Monitoring
- Y16-24 – Chemical reaction specification
- Y16-08 – Flowsheet Monitoring
- Y16-23 – Chemical reaction specification
- Y16-07 – Petroleum Fractions interface specification
- Y16-06 – Petroleum Fractions interface specification
- Review of Errata & Clarifications for Utilities Common Interface
- August 2016 issue
- Interoperability SIG
- Y16-09 – Review of Common interface specifications
- Call for requests for support via the Consultancy Service
- 137 – Monthly conference call
- COLTT 2.3.1 released
- Training course hosted by Linde Engineering
- Y16-07 – Monthly review of actions
- VMGThermo
- Scilab
- Aspen HYSYS
- Malcolm WOODMAN
- Malcolm WOODMAN as new Associate Member
- 136 – Monthly conference call
- Persistence Common Interface specification
- Persistence Errata & Clarifications approved for release
- Y16-07 – CAPE-OPEN Object Model: COBIA
- Y16-07 – Flowsheet Monitoring
- Y16-22 – Chemical reaction specification
- Y16-21 – Chemical reaction specification
- Partial Differential Algebraic Equations
- Numerical solvers
- Synthesis report
- Methods and Tools Integrated Guidelines
- Roadmap
- Type Libraries / Primary Interop Assemblies installers updated
- Too few CAPE-OPEN methanol synthesis reactor models
- Efficient methanol synthesis: Perspectives, technologies and optimization strategies
- July 2016 issue
- Y16-20 – Chemical reaction specification
- Linde Engineering
- BP nominates a new representative within CO-LaN
- Y16-08 – Methods & Tools conference call
- Methods & Tools SIG
- Y16-19 – Chemical reaction specification
- Y16-06 – Flowsheet Monitoring
- CAPE-OPEN link envisioned for biorefineries modelling framework
- On a systems approach to support novelty in bioreactor design
- Y16-18 – Chemical reaction specification
- Y16-06 – CAPE-OPEN Object Model: COBIA
- Y16-05 – Petroleum Fractions interface specification
- Thermodynamics and Physical Properties interface specification v1.1
- Thermodynamics and Physical Properties interface specification v1.0
- Unit Operation interface specification
- Y16-06 – Monthly review of actions
- Taylor-Made Modeling and Solution of Novel Process Units by Modular CAPE-OPEN-based Flowsheeting
- CAPE-OPEN at ESCAPE 26
- Compound data
- Thermo 1.1 layer example used in COFE
- COUSCOUS
- TEA
- COFE
- IndissPlus
- 135 – Monthly conference call
- ProMax
- Simulis Thermodynamics
- Simulis Thermodynamics
- BatchReactor
- New CO-LaN website up and running
- Michael Halloran renewed as consultant
- Use of advanced thermodynamic model through CAPE-OPEN
- Dynamic modeling and control of an intercooled absorber for post-combustion CO2 capture
- Error handling Common Interface specification
- Parameter Common Interface specification
- Identification Common Interface specification
- Collection Common Interface specification
- Y16-05 – CAPE-OPEN Object Model: COBIA
- Aspen Properties
- gPROMS
- CAPE-OPEN 2016 Annual Meeting
- 134 – Monthly conference call
- Y16-05 – Monthly review of actions
- CAPE-OPEN simulation of waste-to-energy technologies for urban cities
- Update on Errata and Clarifications for Persistence interface specification
- Contract for development of COBIA Phase I signed
- 133 – Face to face meeting and conference call
- Y16-04 – Monthly review of actions
- Y16-05 Methods & Tools conference call
- Thesis on CAPE-OPEN at Tampere University of Technology
- Process Simulation Unit Operation Models – Review of open and HSC Chemistry I/O interfaces
- Membrane reactor system model for gas conversion to benzene
- What kind of Modern “green” Chemical Engineering is required for the Design of the “Factory of Future”?
- CERE uses CAPCO2 in Aspen Plus for process evaluation study
- Simulation and multivariable optimization of post-combustion capture using piperazine
- Y16-04 Methods & Tools conference call
- COBIA Phase I development launched
- 132 – Monthly conference call
- Leo BENCY
- Leo BENCY joins CO-LaN as Associate Member
- Y16-03 – Monthly review of actions
- Y16-03 Methods & Tools conference call
- New representative for AVT-Process Systems Engineering
- Contract renewed with Stenhouse Simulations Ltd
- New representative for BelSim SA
- Parameter Errata & Clarifications approved for release
- Li ZHONGYUAN joins CO-LaN as Associate Member
- 131 – Monthly conference call
- Intelligen, Inc. joins as Associate Member
- Intelligen, Inc.
- Li ZHONGYUAN
- Y16-02 – Monthly review of actions
- Y16-02 Methods & Tools conference call
- Computer-Aided Process and Plant Development. A Review of Common Software Tools and Methods and Comparison against an Integrated Collaborative Approach
- CO2 capture process study using gPROMS and Aspen Properties
- A comparison between packed beds and rotating packed beds for CO2 capture using monoethanolamine and dilute aqueous ammonia solutions
- Review of Errata and Clarifications document on Persistence interface specification
- Planar SOFC system modelling and simulation including a 3D stack module
- ADAKOM GmbH
- ADAKOM joins as Associate Member
- 130 – Monthly conference call
- Y16-01 – Flowsheet Monitoring
- Y16-01 – Monthly review of actions
- Y16-01 Methods & Tools conference call
- 129 – Monthly conference call
- CO-LaN duration extended till December 31, 2020
- Value of CAPE-OPEN recognized
- CAPE-OPEN Binary Interop Architecture (COBIA)
- 127 – Monthly conference call
- CAPE-OPEN at AIChE 2015 Annual Meeting
- Y15-11 – Monthly review of actions
- CAPE-OPEN and Heat Exchanger Networks
- Object-Oriented Model and File Format for Heat Exchanger Network Computations
- Y15-10 – CAPE-OPEN Object Model: COBIA
- Annual General Meeting 2015
- Evolution of CO-LaN website
- October 14, 2015 election
- Y15-10 – Petroleum Fractions interface specification
- 126 – Face-to-face meeting
- CAPE-OPEN 2014 Award
- Thermo SIG – October 2014 to September 2015
- CAPE-OPEN update in PRO/II v9.4 and v9.3
- ChemSep / CAPE-OPEN Property Packages
- Challenges replacing native extensions with a CAPE-OPEN Property Package
- CAPE-OPEN 2015 Annual Meeting
- Y15-10 – Monthly review of actions
- Future opportunities and challenges in the design of new energy conversion systems
- COLTT 2.3 released
- Waste reduction (WAR) algorithm applied for environmental impact assessment of coal gasification with carbon capture and storage
- Feedback on CAPE-OPEN use in implementing Gas Treatment components
- UNIT SIG report for 2012
- CAPE-OPEN 2012 Award
- Hydrodynamic interface specification
- Dean LATHAM joins as Associate Member
- Haiyun SU joins as Associate Member
- Xin LIU joins as Associate Member
- Vitor HENRIQUE joins as Associate Member
- Renan RANELLI joins as Associate Member
- COLTT Roadmap updated
- Future Directions for CAPE-OPEN interfaces
- Lunch and Learn on CAPE-OPEN
- Multiflash license renewed
- Change of representative for Dow
- MultiComponentMultiPhase – a framework for thermodynamic properties in Modelica
- 125 – Monthly conference call
- Y15-09 – Monthly review of actions
- MODELICAPROP
- Toward an Interoperable Software Platform for Sustainable Energy
- UNIT SIG report for 2003
- CAPE-OPEN Consultancy Service
- Business Benefit through the Integration of GAP and Aspen HYSYS, via a CAPE-OPEN Interface
- OPTIMIZE 2011
- Streamlining workflows: adding your own unit operations to flowsheeting simulators via CAPE-OPEN
- gPROMS Annual Meeting 2011
- Y15-07 – CAPE-OPEN Object Model
- Y15-21 – Chemical reaction specification
- Peter BANKS
- Advanced models in industrial praxis from process design to process optimization
- InMoTher 2012
- Make your thermodynamic models available in most simulators
- Flowsheet Monitoring interface specification
- Y14-04 – Petroleum Fractions interface specification
- Y14-03 – Errata and Clarifications on UNIT specification
- Y14-02 – Errata and Clarifications on UNIT specification
- Y14-01 – Errata and Clarifications on UNIT specification
- Y15-05 – Flowsheet Monitoring
- Y15-06 – Flowsheet Monitoring
- Y15-03 – Methods & Tools conference call
- Y15-02 – Methods & Tools conference call
- Y15-01 – Methods & Tools conference call
- 124 – Monthly conference call
- Y15-09 – Petroleum Fractions interface specification
- Y15-08 – Petroleum Fractions interface specification
- Y15-11 – Chemical Reaction interface specification
- Y15-17 – Chemical reaction interface specification
- Y15-20 – Chemical reaction interface specification
- 120 – Monthly conference call
- 121 – Monthly Conference call
- Y15-04 – Petroleum Fractions interface specification
- Y15-03 – Reset functionality
- Y15-02 – Reset functionality
- Y15-08 – Flowsheet Monitoring
- Y15-08 – Monthly review of actions
- Petro-SIM Simulator and CAPE-OPEN: Experiences and Successes
- Petro-SIM Simulator and CAPE-OPEN: Experiences and Successes
- GLCC© CAPE-OPEN Compliant Unit Operation
- Using .Net CAPE-OPEN Unit Operations in An Applied Process Simulation Course
- CAPE-OPEN Unit Development with CAPE-OPEN Studio .Net
- Status and Future Perspectives of the Refinery Reactors SIG
- Hydrodynamics SIG report for 2007
- CAPE-OPEN at TOTAL
- UNIT SIG Report on activities in 2007
- Use of CAPE-OPEN at BP as of 2008
- CO-LaN actions in 2008 and Perspectives for 2009
- Air Liquide use of CAPE-OPEN
- 5th CAPE-OPEN US Conference
- P&I Design Ltd joins as Associate Member
- KBC Advanced Technologies plc joins as Associate Member
- Short course on CAPE-OPEN thermo
- Licenses of ProSim software renewed
- MultiFlash license renewed
- Unit Operation Wizard from SASOL
- Article in npt procestechnologie
- Visit to Commissariat à l’Energie Atomique
- Workshop on Modelling
- Contribution at CFD Summit
- Visit to Scandpower Petroleum Technology
- Y15-19 – Chemical reaction interface specification
- Y15-18 – Chemical reaction interface specification
- CAPE-OPEN event in Cambridge, UK
- CO-LaN Annual General Meeting 2001
- How will organizations find the resources to migrate to CO compliance and still meet their original goals of delivering the capability of the Software Components? And, what will prevent organizations that are good at wrapping for CO compliance (but not so good at modeling) from dominating the market?
- What is the role for universities and research institutes in the CO marketplace?
- Won’t having to pay for the use of many components be a nightmare?
- What is the incentive for different companies to share models?
- How does CO address which criteria to choose for process optimization?
- Who is providing CO-compliant environments and/or components?
- What is the relationship between CO and Open-Spirit?
- What is the relationship between CO and OPC?
- What is the relationship between CO and STEP?
- What is IMS?
- How will CO compliant Software Components be distributed?
- How much effort will be required to make a Software Component CO compliant?
- How users know which Software Components are CO compliant?
- How is the CO-LaN funded?
- What is the CO-LaN?
- When and where can we join the club?
- What does “CO-compliant” mean?
- Does CO cover CFD (Computational Fluid Dynamics)?
- What does CO not cover?
- When and where can I get some training on how to bring my models to the CAPE-OPEN standard?
- What are COM and CORBA ?
- What is middleware?
- What is the difference between a PME and a COSE (CAPE-OPEN Simulation Environment)?
- What is a Process Modeling Environment (PME)?
- What is a Process Modeling Component (PMC)
- What are some examples of Process Modeling Environments (PMEs) that are currently used?
- What are some examples of Process Modeling Components (PMCs) that are currently used?
- What are some kinds of tools using CAPE models?
- Caspeo joins as Associate Member
- Zhejiang University joins as Associate Member
- SimTech joins as Associate Member
- PSE Ltd joins as Associate Member
- Result of Request For Bids on PME Tester
- CAPE-OPEN at FOCAPD 2009
- Interfacing IPOPT with Aspen Open Solvers and CAPE-OPEN
- Aurel joins as Associate Member
- Y15-07 – Monthly review of actions
- BR&E joins as Associate Member
- Change of Aspentech representative
- Franco MOCKE joins as Associate Member
- Y15-01 – Reset functionality on Unit Operation
- Y15-16 – Chemical Reaction interface specification
- Y14-01 – Chemical reaction interface specification
- GLCC in ProSimPlus
- Gas-Liquid Cylindrical Cyclone
- Shortcut in ProSimPlus
- BatchColumn
- ProSimPlus
- 123 – Monthly conference call
- Y15-07 – Petroleum Fractions interface specification
- Y15-14 – Chemical Reaction interface specification
- A decision support environment for the high-throughput model-based screening and integration of biomass processing paths
- Errata and Clarifications on Identification Common Interface
- Shortcut in PRO/II
- Alan SCOTT joins as Associate Member
- CAPE-OPEN Interoperability with ProMax
- 2013 SimSci Client Conference
- Dr Ismael DIAZ joins as Associate Member
- Y15-13 – Chemical Reactions interface specification
- Petro-SIM
- MultiFlash
- A molecular reconstruction feed characterization and CAPE OPEN implementation strategy to develop a tool for modeling HDT reactors for light petroleum cuts
- MultiFlash Property Package in ChemCad
- BASF
- ChemSep
- COMSOL
- UniSim Design
- VALI
- AixCAPE e.V. joins as Associate Member
- IK-CAPE
- Shortcut
- PDVSA Intevep paper at PSE 2015 – ESCAPE 25
- Revised Charter for Methods and Tools Special Interest Group
- Clarifications on Collection and Simulation Context
- PPDB Tester development awarded to ProSim SA
- 1st CAPE-OPEN event at EniTecnologie
- Contribution at International IMS Project Forum
- COLTT 2.2 released
- New representative for Max-Planck-Institute für dynamik komplexer technischer Systeme
- New representative for Technishe Universität Hamburg-Harburg
- RENESENG Workshop
- Competitiveness and efficiency through CAPE-OPEN
- Y15-12 – Chemical Reactions interface specification
- Nominations for the CAPE-OPEN 2014 Award
- 122 – Monthly conference call
- AspenTech renews licenses for CO-LaN
- Using ChemSep, COCO and other modeling tools for versatility in custom process modeling
- Cosmotherm
- PRO/II
- Aspen Plus
- CAPE-OPEN 2012 Award
- CAPE-OPEN in ProcessNet
- Y15-06 – CAPE-OPEN Object Model
- Y15-06 – Petroleum Fractions interface specification
- Consultancy Services provided to AspenTech
- CAPE-OPEN Unit Operation socket in VMGSim
- Consultancy Services provided to Virtual Materials Group
- Optimal Product Quality Control in a Hydrocracking Fractionator with Process Simulation Approaches
- Y15-03 – Flowsheet Monitoring
- Anaproc joins as Associate Member
- 119 – Face to face meeting
- Contract renewed with Stenhouse Simulations Ltd
- Y15-02 – Monthly review of actions
- Y15-02 – Flowsheet Monitoring
- 118 – Monthly conference call
- Call for requests for support via the Consultancy Service
- Y15-01 – Monthly review of actions
- 117 – Monthly conference call
- Capability-analysis of co-simulation approaches for process industries
- Y15-01 – Flowsheet Monitoring
- Article in Desalination and Water Treatment Journal
- Implementation of membrane models on a CAPE-OPEN tool to simulate a process including RO membranes
- Anatol GUTAK joins as Associate Member
- Anatol GUTAK
- 116 – Monthly conference call
- Speeding up model using CAPE-OPEN thermodynamics
- Simplification of detailed rate-based model of post-combustion CO2 capture for full chain CCS integration studies
- Laboratoire Réactions Génie des Procédés
- Polypropylene production simulation with CAPE-OPEN interfacing of PRO/II and gPROMS
- Aromatization of propane: Techno-economic analysis by multiscale “kinetics-to-process” simulation
- Microsoft Excel Unit Operation in PRO/II
- Benchmarking and Comparing First and Second Generation Post Combustion CO2 Capture Technologies
- Revision of the Petroleum Fractions interface specification
- September 11, 2014 election
- CAPE-OPEN Update in PRO II 9.3 and 9.4
- K-Spice CAPE-OPEN compliant for thermodynamics
- CAPE-OPEN 2014 Annual Meeting
- CAPE-OPEN thermodynamics for batch column simulations
- CAPE-OPEN 2013 Award
- Thermo SIG progress report 2014
- Honeywell CAPE-OPEN Update
- UNIT SIG – October 2013 to September 2014
- BatchColumn use of CAPE-OPEN thermodynamics
- UNIT SIG report 2014
- International Conference on Chemical & Process Engineering – 12
- Thermo SIG
- Thilo von TROTHA, PhD
- CAPE-OPEN review in Chemie Ingenieur Technik
- Process Design of Industrial Triethylene Glycol Processes Using the Cubic-Plus-Association (CPA) Equation of State
- CAPE-OPEN: Interoperability in Industrial Flowsheet Simulation Software
- Modeling studies on absorption of CO2 by monoethanolamine in rotating packed bed
- Rotating packed bed modelled in gPROMS using Aspen Properties
- Energy and water interactions: implications for industry
- CAPE-OPEN based framework envisioned for energy-water nexus
- CAPE-OPEN at ICIST 2014
- Stenhouse Simulations Ltd
- Bryn STENHOUSE to provide administrative support to CO-LaN
- 105 – Monthly conference call
- Optimal design of reactive distillation systems: Application to the production of ethyl tert-butyl ether (ETBE)
- Reactive distillation modelled with gPROMS and Aspen Properties
- 104 – Monthly conference call
- CAPE-OPEN Property Package for ChemSep
- Ismael DIAZ, PhD
- VORtech awarded Consultancy Services
- Honeywell awarded Consultancy Services
- CAPE-OPEN Unit Operation socket in UniSim Design
- AIChE 2013 Annual Meeting
- Dissemination of University Research through CAPE-OPEN
- VORtech BV as new Associate Member
- VORtech
- MOSAICmodeling
- Modeling Multicomponent Distillation with Open Source and CAPE-OPEN
- CAPE-OPEN 2013 Annual Meeting
- An Insider/Outsider/Insider (sort of) view of CAPE-OPEN
- Dissemination of University Research through CAPE-OPEN
- September 19, 2013 election
- Development of CAPE-OPEN interface for integration of thermodynamic properties
- Methods & Tools SIG report – October 2012 to September 2013
- Dean LATHAM
- Article on MATLAB Unit Operation in Aspen Plus
- Industrial Methanol from Syngas: Kinetic Study and Process Simulation
- A method for modeling a catalytic distillation process based on seepage catalytic packing internal
- Consultancy Services: how does it work?
- Xin LIU
- Haiyun SU, PhD
- NETRAL no longer a Member
- AkzoNobel has resigned from CO-LaN
- Clarifications on Thermodynamic and Physical Properties 1.1
- Vitor HENRIQUE
- Renan RANELLI
- CAPE-OPEN Award 2011
- Engineering Biomass Conversion Processes: A Systems Perspective
- Development and application of a rigorous model for predicting ultralow sulphur diesel (ULSD) unit performance
- Streamlining CAPE-OPEN Interoperability with ProMax
- A CAPE-OPEN Unit Operation Software Component for Solving Chemkin Reactor Networks Inside Process Modeling Simulations
- Thermodynamic Models As CAPE-OPEN Equilibrium Calculators
- CO-LaN Report Y11-12
- Incentives for a new CAPE-OPEN Object Model
- Petroleum Properties Via CAPE-OPEN: From Prototype to Commercial Application
- AIChE 2012 Annual Meeting
- CAPE-OPEN Models for Hg Speciation and Partitioning Flowsheet Development
- Artur KRUEGER joins CO-LaN
- Franco MOCKE
- Modelling liquefied-natural-gas processes using highly accurate property models
- September 20, 2012 election
- Thermo SIG report – October 2011 to September 2012
- CAPE-OPEN 2011 Award
- CAPE-OPEN 2012 Annual Meeting
- Arthur KRUEGER
- Evaluating Process Sustainability Using Flowsheet Monitoring
- PPDS license granted to CO-LaN
- PPBLAB: A new multivariate population balance environment for particulate system modelling and simulation
- COLTT 2.1 released
- Development and Application of Rigorous Kinetic Model for Predicting Ultra Low Sulphur Diesel (ULSD) Unit Performance
- Shell paper at ACS Symposium
- Revised UNIT Operation interface specification document
- BR&E grants a ProMax® license to CO-LaN
- Real-time application of CAPE-OPEN for PTA process monitoring and optimization
- Hydrodynamic SIG (on hold)
- CAPE-OPEN in Russia
- Prototype of Flowsheet Monitoring interface
- New representative for TÜV SÜD NEL in CO-LaN
- Honeywell renews UniSim Design licenses
- XChanger Suite license renewed
- Simulis Thermodynamics license renewed
- Ontological framework for enterprise-wide integrated decision-making at operational level
- Advanced approaches of industrial informatics in the chemical industry
- Technische Universität Berlin
- HDHPLUS® technology reactors as interoperating simulation components
- CAPE-OPEN related publication
- Bertrand BRAUNSCHWEIG receives the CAPE-OPEN 2010 Award
- CAPE-OPEN 2010 Award
- September 28, 2011 election
- Source code examples of CAPE-OPEN thermodynamic components
- COLTT 2.0 released
- Updated Thermodynamic and Physical Properties interface specification v1.1
- Synthesis and Design of Demethaniser Flowsheets for Low Temperature Separation Processes
- PRO/II license renewed
- Refinery Reactors SIG (merged with UNIT SIG)
- CAPE-OPEN Unit Operation in FORTRAN 95
- Updated Thermodynamic and Physical Properties interface specification v1.0
- Another CAPE-OPEN related publication
- Development of an Industrial Multitubular Fixed Bed Catalytic Reactor as CAPE-OPEN Unit Operation Model Applied to Ethene Production by Ethanol Dehydration Process
- Daniel WAGNER joins as Associate Member
- Fives Cryogénie as new Associate Member
- Fives Cryogénie
- Piping Systems Research and Engineering Company (NTP Truboprovod)
- NTP Truboprovod OOO joins as Associate Member
- Daniel WAGNER
- CAPE-OPEN at Transient Multiphase Flows meeting
- Licenses of AspenTech software
- MultiFlash license renewed
- XChanger Suite license
- Bryan Research & Engineering, LLC
- Stochastic modeling and multi-objective optimization for the APECS system
- SFGP event
- Implementation of the waste reduction (WAR) algorithm utilizing flowsheet monitoring
- ProSim SA supplies new licenses to CO-LaN
- Request For Comments on revised UNIT interface specification
- Clarifications on FORTRAN Unit Operation Wizard
- Ross Tomson joins as Associate Member
- Interoperability between Modelling Tools (MoT) with Thermodynamic Property Prediction Packages (Simulis® Thermodynamics) and Process Simulators (ProSimPlus) Via CAPE-OPEN Standards
- Ross TOMSON
- AIChE Annual Meeting 2010
- IFP New Energy as Corporate Associate Member
- Visual Basic 6 and C++ source codes examples of Unit Operations released
- COMSOL Multiphysics licence awarded to CO-LaN
- JMS2010: Modeling and Simulation Symposium 2010
- CO-LaN duration extended till Dec 31, 2015
- November 25, 2010 election
- Gasification Technologies Conference 2010
- Industrial Requirements for Thermodynamics and Transport Properties
- Survey from Working Party on Thermodynamic and Transport properties at EFCE
- Process/Equipment co-simulation for design and analysis of advanced energy systems
- Safety Improvement and Operational Enhancement via Dynamic Process Simulator: A Review
- A thermodynamic equilibrium reactor model as a CAPE-OPEN unit operation
- New Associate Member: Struttura Informatica
- UNIT SIG Charter 2010 approved
- Ronald Klein leaves CO-LaN Management Board
- HYDRO SIG Charter 2010 approved
- New Associate Member: T.P. van der Stelt
- Struttura Informatica Srl
- Teus van der STELT
- Michael Halloran renewed as consultant
- Towards multiscale modelling in product engineering
- Influence of Thermodynamic Property Models on LNG Process Simulation
- Systematic generation of a CAPE-OPEN compliant simulation module from GAMS and FORTRAN models
- CAPE-OPEN 2009 Award
- GAMS as modeller for CAPE-OPEN Unit Operation
- Training course on CAPE-OPEN
- March 24, 2010 election
- New Associate Member: INOSIM GmbH
- INOSIM Software GmbH
- AixCAPE appoints a new representative
- Request For Comments on revised Thermo 1.0 specification
- Reaction Design joins CO-LaN
- Reaction Design
- CAPE-OPEN framework for polymerization processes
- Development of Advanced Software Tools for Computer-Aided Design, Simulation, and Optimization of Polymerization Processes
- 7th CAPE-OPEN European Conference
- COLTT 1.08 released
- Methods & Tools SIG re-commissioned
- ANSYS renews Fluent license offered to CO-LaN
- Vishwamitra Research Institute joins CO-LaN as Associate Member
- Vishwamitra Research Institute
- NETL 2009 Workshop on APECS
- Alain RICORDEAU
- Extensions to CAPE-OPEN Numerical interfaces proposed
- Integrated model-centric framework for support of manufacturing operations. Part I: The framework
- CAPE-OPEN at ESCAPE 19
- CAPE-OPEN at PSE 2009
- Universiti Hussein Onn Malaysia
- Universiti Tun Hussein Onn Malaysia joins as Associate Member
- A Software Factory for the Generation of CAPE-OPEN Compliant Process Modelling Components
- Adaptation and testing of data reconciliation software for CAPE-OPEN compliance
- Multiscale Modelling Framework for Chemical Product-Process Design
- Dynamic simulation of Chemical Engineering systems using OpenModelica and CAPE-OPEN
- 2009 AspenTech Worldwide User Conference
- CAPE-OPEN 2008 Award
- CAPE-OPEN 2008 Award
- April 2, 2009 election
- Numerical and computational strategy for pressure-driven steady-state simulation of oilfield production
- Computer aided design for sustainable industrial processes: Specific tools and applications
- Ricardo PASCUAL, PhD
- Fédéral University of Rio de Janeiro joins as Associate Member
- Federal University of Rio de Janeiro
- Scilab Unit Operation
- Eduardo INGLEZ
- Flowsheet Monitoring – How, what and why?
- Service-Oriented CAPE: A New Direction for Software Applications
- Dynamic simulation and numerical analysis tool
- Aurel Systems Inc.
- Use of the SAFT equation of state in process modelling
- Use of CAPE-OPEN standards in the interoperability between modelling tools (MoT) and process simulators (Simulis® Thermodynamics and ProSimPlus)
- Expanding Process Modelling Capability through software interoperability standards: Application, extension and maintenance of CAPE OPEN standards
- CAPE-OPEN at ESCAPE 18
- NTNU Department of Energy and Process Engineering joins CO-LaN
- NTNU Department of Energy and Process Engineering
- P&I Design Ltd
- 5th CAPE-OPEN European Conference
- Akzo Nobel joins CO-LaN as Full Member
- April 3, 2008 election
- COWAR: A CAPE OPEN software module for the evaluation of process sustainability
- Evaluation of process sustainability with CAPE-OPEN
- Alan SCOTT, PhD
- Errata and clarifications document for Thermo 1.0
- .NET Unit Wizard
- COLTT 1.06 released
- An overview of the interoperability roadmap for COM/.NET-Based CAPE-OPEN
- A deliverable from CO-LaN to CAPE-OPEN developers and users: the CAPE-OPEN logging and testing tool (COLTT)
- VMGThermo license renewed for 9 months
- Critical review of CAPE-OPEN published
- Neuerungen und Erfahrungen aus der Anwendung des CAPE‐OPEN Standards
- ChemStations extends CO-LaN license of ChemCad
- Software licenses received from Aspentech and SimSci-Esscor
- Process Systems Enterprise provides additional license
- NETRAL SA as new Associate Member
- Development of a Process Sustainable Prediction (PSP) framework
- CAPE-OPEN: An international standard for process simulation
- Michael HALLORAN
- Michael HALLORAN joins as Associate Member
- Akzo Modelling Seminar
- COMSOL AB joins as Associate Member
- COMSOL AB
- CAPE-OPEN at SPE ATCE 2007
- Short course at AIChE’07
- COLTT 1.05 released
- SPT joins as Associate Member
- Scandpower Petroleum Technology AS
- KBC Advanced Technologies plc
- Céondo joins as Associate Member
- Céondo GmbH
- Ruhr-Universität Bochum joins as Associate Member
- Ruhr-Universität Bochum Chair of Thermodynamic
- Simulation of batch distillation based on CAPE-OPEN standard
- Thesis on CAPE-OPEN at LIG
- Distributed Interoperable Environment for Numerical Simulations using CAPE-OPEN Components
- Iowa State University
- Iowa State joins as Associate Member
- A library for equation system processing based on the CAPE-OPEN ESO Interface
- CAPE-OPEN consultancy scheme
- TINA
- DynoPC by Carnegie Mellon University
- COLTT 1.04 released
- Thanks to Bertrand!
- A hierarchical approach for the estimation of environmental impact of a chemical process: from molecular modeling to process simulation
- ESCAPE-17
- A deliverable from CO-LaN to CAPE-OPEN developers and users: the CAPE-OPEN Logging and Testing Tool (COLTT)
- Dr Michael Wulkow Computing in Technology GmbH
- CiT joins as Associate Member
- Wizard for Unit in Pascal
- CAPE-OPEN at Aspen Engineering Suite User Group Meeting
- Reaction Engineering International
- REI joins as Associate Member
- Feedback from CAPE-OPEN 2007 Annual Meeting
- Science Application International Corporation
- SAIC joins as Associate Member
- CAPE-OPEN 2007 Award
- CAPE-OPEN 2006 Award
- CARNOT
- Thermo SIG report for 2006
- A CAPE-OPEN Unit Operation for the Evaluation of Environmental Impact of a Chemical Process
- 4th CAPE-OPEN European Conference
- CAPE-OPEN 2006 Award
- Methods & Tools SIG report for 2006
- Bertrand BRAUNSCHWEIG, PhD
- Annual General Meeting 2007
- March 8, 2007 election
- Interoperability experiments on Matlab/Simulis Thermodynamics/TEA via CAPE-OPEN
- CAPE-OPEN Logging and Testing Tool (COLTT) – Production release
- Anaproc
- Halias Technologies
- Halias Technologies joins CO-LaN
- MetaHeuristics LLC
- Infochem Computer Services Ltd
- Lamar University
- A software environment for simultaneous dynamic optimization
- New representative for ANSYS-Fluent
- 3rd CAPE-OPEN US Conference
- CAPE-OPEN Short Course at AIChE 2006 Annual Meeting
- CAPE-OPEN at ACHEMA 2006
- DTU Center for Energy Resources Engineering
- CAPE-OPEN presentation at Purdue University
- Technical University of Denmark (IVC-SEP) as new Associate Member
- Future trends in CFD include integration with process simulation software
- Novel areas and future trends of computational fluid dynamics software applications in chemical engineering
- New Associate Member: University of Trieste
- Universita di Trieste
- Institute of Chemical Technology Prague
- Institute of Chemical Technology Prague joins CO-LaN
- CO-LaN 2006 Technological Survey
- HTRI 2006 North American Meeting
- .NET Interoperability Guidelines
- Flowsheet Simulation of Solids Processes
- Interest in CORBA version of CAPE-OPEN
- Re-scheduling invocations of services for RPC grids
- CAPE Working Party Recent Achievement Award
- Refinery Reactors SIG launched
- Michael HALLORAN
- Process Systems Enterprise 2006 Annual Meeting
- CAPE-OPEN 2005 Award
- 3rd CAPE-OPEN European Conference
- CO-LaN status report for 2005
- Annual General Meeting 2006
- Interoperability Support SIG achievements in 2005
- March 9, 2006 election
- UniSim Design™ CAPE-OPEN Compliance
- gPROMS Unit Operation running in UniSim Design
- gO:CAPE-OPEN Unit Operation in UniSim Design
- CO-LaN financial report for 2005
- A look into the CAPE-OPEN kitchen of COCO
- CAPE and Property Packages: Air Liquide approach
- HIDiC in Aspen Plus
- Beyond compliance
- XChanger Suite
- First training session targeted at CAPE-OPEN
- The Tulsa University joins as Associate Member
- AixCAPE e.V.
- The University of Tulsa
- SimTech Simulation Technology
- New Shell representative to lead UNIT SIG
- Visit to The University of Tulsa
- Caspeo
- CO-LaN duration extended till December 31, 2010
- Development of a chemical process modelling environment based on CAPE-OPEN interface standards and the Microsoft .NET framework
- CO-LaN visits IFP
- Visit to NETRAL
- AmsterCHEM
- Visit to Akzo Nobel Chemicals
- Paper in Info Chimie Magazine
- Advanced Process Engineering Co-Simulation of the FutureGen Power and Hydrogen Production Plant
- AIChE 2005 Annual Meeting
- CAPE-OPEN and Simulis® Thermodynamics enable you to use rigorous thermodynamics in MATLAB®
- US EPA software implementing CAPE-OPEN
- Honeywell Process Solutions
- Max-Planck-Institut für Dynamik komplexer technisher Systeme
- Process Simulation and Modeling for Industrial Bioprocessing: tools and techniques
- Large-Scale Nonlinear Programming with a CAPE-OPEN Compliant Interface
- ESCAPE-15
- Tools Available for Support of Migration to CAPE-OPEN Standard
- ICheaP-7
- Tester for Physical Properties Data Base components
- 22 – Monthly conference call
- Solidsim
- Chemstations, Inc.
- Chemstations Inc. joins as Associate Member
- Belsim Engineering SA
- Sidat Hyder Morshed Associates (SHMA) Ltd
- SINTEF
- Xchanger Suite
- Annual General Meeting 2005
- ChemSep in Aspen Plus
- 2nd CAPE-OPEN European Conference
- CAPE-OPEN 2004 Award
- Non-equilibrium modelling: the CAPE-OPEN way
- Interoperability SIG report for 2014
- 20 – Monthly conference call
- Zhejiang University
- SARL Michel Pons Technologie
- US Department of Energy, National Energy Technology Laboratory
- CAPE Working Party endorses CAPE-OPEN
- CHEOPS: A tool-integration platform for chemical process modelling and simulation
- Universitatea POLITEHNICA din Bucuresti
- University of Valladolid
- ProtechSoft Systems as new Associate Member
- Shortcut‐Modelle in der Fließbildsimulation
- Sim Infosystems
- Chemical Process Engineering Research Institute
- Example of use of CAPE-OPEN at ATOFINA
- CAPE-OPEN Concepts
- What are you looking for in CAPE-OPEN?
- 1st CAPE-OPEN US Conference
- Introduction to CAPE-OPEN
- Current CAPE-OPEN compliant components
- Modifications, simplifications, and efficiency tests for the CAPE-OPEN numerical open interfaces
- DIABOLO framework
- EGAS endorses CAPE-OPEN
- Carnegie Mellon University
- CAPE-OPEN at ESCAPE 14
- Extended mathematical software library for CAPE
- March 2003 issue
- Kerry IRONS is retiring
- Informatique et Procédés endorses CAPE-OPEN
- February 13, 2004 election
- 1st CAPE-OPEN European Conference
- The SolidSim project
- CAPE-OPEN Consultancy Service
- Report on Interop SIG activities in 2003
- Report on Thermo SIG activities in 2003
- CAPE-OPEN 2003 Award
- Management and Reuse of Mathematical Models in the Industrial Design Process
- EMSO: A New Environment for Modelling, Simulation and Optimization
- VDI-GVC endorses CAPE-OPEN
- FLUENT® and Aspen Plus® coupling
- ChemSep joins as Associate Member
- ChemSep
- Call for Bids on Consultancy Services
- CAPE-OPEN Update in PRO/II v9.2 and Patch1
- Utilities Common Interface specification
- Petroleum Fractions
- Chemical Reactions
- FIBER
- Physical Properties Data Bases
- The CAPE-OPEN interface specification for reactions package
- Integrated Process Unit Control and Plantwide Optimization
- Industrial Implementations of the CAPE-OPEN standard
- ICheaP-6
- Processium
- Processium joins as Associate Member
- Opening unit operations for process engineering software solutions
- Norsk Hydro resigns from UNIT SIG leadership
- Aspen Technology, Inc.
- CAPE-OPEN Update issue 5
- SolidSim project selects CAPE-OPEN
- TUHH joins as Associate Member
- Hamburg University of Technology
- February 4, 2003 election
- CAPE-OPEN 2002 Award
- Models and applications for polymer simulation
- Missions of the CAPE-OPEN Laboratories Network
- FOCAPO 2003
- The CAPE-OPEN Standard and CO-LaN
- Y02-03 – Thermo version 1.1
- Y02-02 – Thermo version 1.1
- U.S. Environmental Protection Agency
- CAPE-OPEN as AspenWorld2002
- Value of the CAPE-OPEN standard for ATOFINA
- The CAPE-OPEN Standard: Motivations, Development Process, Technical Architecture & Examples
- RSI
- New CO-LaN Associate Member: VTT
- VTT – Technical Research Centre of Finland
- CAPE-OPEN abstract accepted for ESCAPE 13
- Y02-01 – Kick-off meeting
- Open Software Architecture For Process Simulation
- EPCON International
- ANSYS, Inc.
- TÜV SUD
- Process Systems Enterprise Ltd
- Virtual Materials Group Inc.
- DTU Computer Aided Process Engineering Center
- ENSIACET
- COSMOLogic GmbH & CO KG
- 04 – Monthly conference call
- CAPE-OPEN day in Teeside
- An Open Software Architecture for Steady-State Data Reconciliation and Parameter Estimation
- Nonlinear Analysis of gPROMS Models Using DIVA via a CAPE ESO Interface
- The Current Status of CAPE-OPEN Standard
- ESCAPE 12 Conference
- Heat Transfer Research Inc.
- Integrated Process Simulation and CFD for Improved Process Engineering
- Contribution accepted at FOCAPO 2003
- Visual Basic Unit Operation Wizard
- March 2002 issue
- UNIT SIG
- ESCAPE 12 award
- March 23, 2002 election
- Dehydration and hydrocarbon dewpointing of natural gas by membrane technology
- CAPE-OPEN 2001 Award
- December 4, 2001 election
- Annual General Meeting 2001
- Standardisation and Innovation in Information Technology 2001
- CAPE-OPEN at Expert Group Meeting organized by ICS-UNIDO
- CAPE-OPEN (CO) standards: implementation and maintenance
- Global CAPE-OPEN: Open Architectures for Process Modelling Software
- Version 0.93 released
- DIPPR (AIChE Design Institute for Physical Properties)
- DIPPR joins as Associate Member
- European Refining Technology Conference – 2001
- Virtual Materials Group joins as Associate Member
- BelSim SA joins as Associate Member
- ESCAPE-11
- Open software architecture for numerical solvers : design, implementation and validation
- ICheaP-5
- CAPE-OPEN thermodynamic socket in gPROMS
- Kongsberg Oil & Gas Technologies AS
- W. David SMITH, Jr
- Universitat Politecnica de Catalunya
- Univerza v Mariboru
- The Dow Chemical Company
- Prosim SA
- January 30, 2001 election
- Air Liquide
- CO-LaN is born!
- IFP Energies Nouvelles (IFP New Energy)
- AVEVA™ Group, plc
- RWTH Aachen. Aachener Verfahrenstechnik
- RWTH Aachen. Lehrstuhl für Informatik V (Information Systems)
- DECHEMA e.V.
- Shell Global Solutions International B.V.
- Technical services provided by CO-LaN
- BP
- Provisional CO-LaN budget for 2001
- Hans-Horst MAYER
- CAPE-OPEN Specialty Property Packages – New Thermodynamic Models and Software Integration Paradigm
- Process modeling: The promise of open software architectures
- CAPE-OPEN: Experiences from a Standardization Effort in Chemical Industries
- How On-Line Fault Detection and Supervision Systems Can Benefit from the CAPE-OPEN Standard Interfaces in Process Simulation
- Application of CAPE in industry — Status and outlook
- A standard interface for use of thermodynamics in process simulation
